Top 10 Raspberry Pi 3 B Cooling Fan

0

We spent many hours on research to finding raspberry pi 3 b cooling fan, reading product features, product specifications for this guide. For those of you who wish to the best raspberry pi 3 b cooling fan, you should not miss this article. raspberry pi 3 b cooling fan coming in a variety of types but also different price range. The following is the top 10 raspberry pi 3 b cooling fan by our suggestions

811 reviews analysed

1. GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

Feature

Description

Description:
The 52Pi New Colorful Ice Tower Cooler is inspired by the single-stack tower-style heatsink and fan (HSF) assemblies which dominate the desktop PC market. It includes thermal interface material (TIM) pads, mounting brackets and accessories for the Raspberry Pi 4 and Raspberry Pi 3 Model B/Model B+, a tiny screwdriver, and a small but full-color manual. new feature is using Compatible bracket and a color LED fan with automatic color change.
Features:
Color LED fan with automatic color change
Single-stack tower-style heatsink
DC 5V Power in (Can be powered by the Raspberry Pi)
5mm copper tube
Super heat dissipation
Rated power 0.4W @5V, 0.08A
Easy to setup
Acrylic protection panel
Plug and play

Package Includes
1 x Ice Tower Cooler
4 x M2.5×6+6 Copper Stick
4 x M2.5 Nuts
6 x M2.5×6 Screws
3 x Thermal Tape
1 x Screwdriver
1 x Mounting brackets pack (For 3B/3B+/4B)
1 x Acrylic protection panel
1 x Instructions

2. LANDZO Raspberry Pi 3 B+ Dual Fan with Heatsink … (for 3B+)

LANDZO Raspberry Pi 3 B+ Dual Fan with Heatsink … (for 3B+)

Feature

Description

Size:For 3B+

Raspberry Pi 3 B+ Dual Fan with Heatsink

3. GeeekPi Raspberry Pi Cooling Fan, Raspberry Pi ICE Tower Cooler, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

GeeekPi Raspberry Pi Cooling Fan, Raspberry Pi ICE Tower Cooler, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

Feature

4. GeeekPi Raspberry Pi 3 B+ Cooling Fan, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 3B+ (B Plus)

GeeekPi Raspberry Pi 3 B+ Cooling Fan, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 3B+ (B Plus)

Feature

Description

Extreme Cooling Fan Kit For Raspberry Pi 3B+

Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.

Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes

5. Enokay Raspberry Pi 2 3 Model B B+ Dual Fan with Raspberry Pi Heatsink for Raspberry Pi 2B 3B 3B+

Enokay Raspberry Pi 2 3 Model B B+ Dual Fan with Raspberry Pi Heatsink for Raspberry Pi 2B 3B 3B+

Feature

Description

The Raspberry Pi Dual Fan Was Included the Thermal Conductive Adhesive.

1.Connecter of the Raspberry Pi Dual Fan: PH2.0-2P
2.Cable Length of the Raspberry Pi Dual Fan:8cm
3.Use For Raspberry Pi 3 Model B+
4.DC:5V 0.2A
5.Not included Raspberry Pi 3 Model B+ Motherboard
Packing included:
1.Raspberry pi Dual Fan
2.Black Aluminum Heatsink.
3.Copper Heatsink

6. Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b

Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b

Feature

Description

Color:Black-Clear

(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .

Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.

Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case

Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)

Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.

(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.

Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A

7. MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project

MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project

Feature

Description

Color:2pcs mini fan 3.3V 5V

2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W

Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB

Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm

8. Aokin 4 PCS Raspberry Pi Fan 30x30x7mm Cooling Fan Brushless CPU Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 3 B+, Pi 3, Pi 2, Pi 1 B+

Aokin 4 PCS Raspberry Pi Fan 30x30x7mm Cooling Fan Brushless CPU Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 3 B+, Pi 3, Pi 2, Pi 1 B+

Feature

Description

Aokin 4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project

Features:

This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB

Package Including:

4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm

9. Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)

Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)

Feature

Description

Color:Black (4-Pack)

Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.

Specifications:

– Fan Size: 30x30x7.5 mm (LxWxH)

– Wire Length: 2.6 inches (66mm)

– Connector: One-to-Two pin

– Color: Black

– Bearing Type: Hypro Bearing

– Operating Voltage: DC 3.3V – 5V

– Start up Voltage: DC 3V

– Current: 120 mA

– Speed: 5000RPM±15%

– Airflow: 1.79CFM

– Noise Level: 15.92dBA

– Life Time: 30,000 hours

Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.

10. Raspberry Pi Fan, iUniker Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan for Raspberry Pi 3 B+, Pi 3, Pi 2, Pi 1 B+, RetroFlag NESPI Case(2-Pack)

Raspberry Pi Fan, iUniker Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan for Raspberry Pi 3 B+, Pi 3, Pi 2, Pi 1 B+, RetroFlag NESPI Case(2-Pack)

Feature

Description

Color:2-Pack

Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+

Bearing Type: Sleeve
Size (L x W x H): 3 x 3 x 0.7 cm
Connector: 2 pin
Rated Voltage: DC 3.0-5.8V
Current: 0.1A
Speed: 6000RPM±10%
Airflow: 5m³/h
Noise Level: 18dba±10%
Wire Length: 60 mm
Color: Black

Package Includes:
2x iUniker Cooling Fan
2x Screw Sets

Conclusion

By our suggestions above, we hope that you can found Raspberry Pi 3 B Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general