Top 10 Cr10s Cooling Block

0

Nowadays, there are so many products of cr10s cooling block in the market and you are wondering to choose a best one.You have searched for cr10s cooling block in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings cr10s cooling block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

546 reviews analysed

1. All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm

All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm

Feature

Description

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

2. All Metal Hotend with Slotted Cooling Block for Wanhao i3

All Metal Hotend with Slotted Cooling Block for Wanhao i3

Feature

Description

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

3. Creality 3D Printer Silicone Socks/Aluminum Heater Block/Stainless Steel Throat for MK7 MK8 Extruder Kits Ender 3/Ender 3 Pro/Creality CR-10 /CR10S /S4 /S5 (3 Packs)

Creality 3D Printer Silicone Socks/Aluminum Heater Block/Stainless Steel Throat for MK7 MK8 Extruder Kits Ender 3/Ender 3 Pro/Creality CR-10 /CR10S /S4 /S5 (3 Packs)

Feature

Description

These are the official Creality 3D Printer Replacement Parts for Extruder Kits Which Works Prefectly for Ender 3 /Ender 3 Pro /Creality CR10 /CR10S /CR10S Pro /S4 /S5…

Material: Aluminum
Dimensions: 20*20*10mm(LWH)
Net Weight: 10g/pcs
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Suitable for Creality /Ender /Makerbot 3D printers
>br> Package List:
3PCS Silicone Covers
3PCS Aluminum Heater Block
3PCS Stainless Steel Extruder Nozzle Throat

4. Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Feature

Description

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

5. Creality CR10 Heatbed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm

Creality CR10 Heatbed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm

Feature

Description

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!

Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm ;
we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.

Specifications:

> Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm 3D Printer
> Product process: Aluminum Substrate
> Hot Bed Size: 310x310x3mm
> Voltage: 12V
> Power: 220W

Package

1 × Aluminum Hot Bed 310x310x3mm With Cable Which be installed well for CR-10 /CR-10S 3D Printer

Warranty:we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S;
if be used to the other brand modles, customers need to afford to the resonsibility by themselves,
meanwhile, our warranty will not valid for this cause.

6. Ewigkeit MK8 Silicone Sock Heater Block Cover MK7/8/9 Hotend for Creality CR-10,10S,Ender 3,Anet A8 3D Printer(not Include Heater Block))

Ewigkeit MK8 Silicone Sock Heater Block Cover MK7/8/9 Hotend for Creality CR-10,10S,Ender 3,Anet A8 3D Printer(not Include Heater Block))

Feature

7. HITENDER NS0003 CR10 Hot End, Heater Block Assembly for 3D Printers CR10/CR10S/CR10S4/CR10S5/Ender 3/Ender 3 Pro (24V)

HITENDER NS0003 CR10 Hot End, Heater Block Assembly for 3D Printers CR10/CR10S/CR10S4/CR10S5/Ender 3/Ender 3 Pro (24V)

Feature

Description

Size:24V

PRODUCT DESCRIPTION
this is a drop in hotend kit for CR-10 printers. It requires no modification to your printer. It features faster heat dissipation.Thermal heat barrier is made from Titanium Alloy to provide excellent thermal isolation between heater and cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined melt zone.

PRODUCT SPECS
Application: 3D Printer
Material: Aluminum & Stainless Steel & Brass
Installation type: External Wire Connection
Nozzle Size: MK8 0.4mm
Heat Barrier Tube: 30mm
Heater Block Size: 20mm*20mm*10mm
Operating temperature: -40 ~ +260°C (-40 ~ +500 °F)
Thermistor Cable: 1M
Heating Tube: 1M

Package included
1x Aluminum block
1x Heating Tube (heating tube 1 m long)
1x 1.75MM 0.4MM Brass Nozzle
1x M6*30mm Thermal Barrier Tube (built-in Teflon)
1 x Thermistor + Brass sleeve (1 meter long) 

8. BZ 3D CR10 Heatsink All Metal Hotend Upgrade Kit for CR-10 CR-10S CR-10 S4, S5 Ender 3/Pro Ender 5 3D Printer Hotend Titanium Heat Break 1.75/0.4mm MK8 Plated Copper Nozzle Heater Block (Type 4)

BZ 3D CR10 Heatsink All Metal Hotend Upgrade Kit for CR-10 CR-10S CR-10 S4, S5 Ender 3/Pro Ender 5 3D Printer Hotend Titanium Heat Break 1.75/0.4mm MK8 Plated Copper Nozzle Heater Block (Type 4)

Feature

Description

Style:Type 4

Included:
1x CR10 HeatSink
1x Titanium Alloy Heat Break
1x High Quality Plated Copper CR10 Heated Block
1x High Quality MK8 Plated Copper Nozzle(1.75/0.4mm)
Gift:1x MK8 Silicone Sock
Note:Can match MK8 silicone socks. But not perfect. Does not affect the use.

Description:
BZ 3D has always been concerned about product quality.
We are working hard to improve the products quality.
Believed that only high quality products can ensure the quality of your work and bring safety to your work.
There are many cheap products on the market.But please believe in our quality and believe that you will not regret when you receive the goods.
BZ 3D is committed to providing you with the best service!

9. 4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5

4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5

Feature

Description

4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5

10. HICTOP Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10, CR-10S, CR-10 S4, and CR-10 S5

HICTOP Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10, CR-10S, CR-10 S4, and CR-10 S5

Feature

Description

Pls kindly scan the QR code of image, you will get the assembly manaul of this part, thank you.
Package: *Mounting screws
*Aluminum MK8 ‘Extruder’ frame, with bored intake hole.
*Bushing
*Spring
*Brass ‘extruder’ drive gear
*35 mm long teflon intake guide. (keeps filament away from Z-screw rod)
*Special Bowden tube fitting (improved over stock).
For all 1.75 mm filament

Conclusion

By our suggestions above, we hope that you can found Cr10s Cooling Block for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general