Top 10 Cooling Fan 08

0

We spent many hours on research to finding cooling fan .08, reading product features, product specifications for this guide. For those of you who wish to the best cooling fan .08, you should not miss this article. cooling fan .08 coming in a variety of types but also different price range. The following is the top 10 cooling fan .08 by our suggestions

717 reviews analysed

1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

2. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Feature

Description

Color:4pcs 3D Printer Fan 12V 0.08A

4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;

Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise

Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan

3. GDSTIME 60mm x 60mm x 15mm 12v Brushless Dc Cooling Fan

GDSTIME 60mm x 60mm x 15mm 12v Brushless Dc Cooling Fan

Feature

Description

Package include: 1pcs fan include mounting screws & nuts
Dimensions: 60x60x15mm
Connector:XH2.54-2Pin
Rated Voltage: DC:12V
Rated Current: 0.1 Amp
Rated Speed: 3600 RPM
Air flow: 22.7 CFM
Noise: 26 dBA
Bearing Type: Sleeve
Life: 35000 hours
Cable Lenght: 20cm or 7.8 inches
Weight: 30g or 1oz

4. 2packs 40mm x 40mm x 10mm 4010 12V 0.15A Brushless DC Cooling Fan 2pin AB4010M12 UL TUV

2packs 40mm x 40mm x 10mm 4010 12V 0.15A Brushless DC Cooling Fan 2pin AB4010M12 UL TUV

Feature

Description

Color:40mm fan

Description : Model: AB4010M12 NAME:DC12V BRUSHLESS FAN

Rated Voltage : DC12V
Operation Voltage: DC10.8-13.2
Consuming Current : 0.11A(0.15 Max.)
Consuming Power: 1.32W(1.8 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6200 PRM
Iife Expectance: 70,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 25db***
DC Line Length : 100mm
Max. Air Flow: 6.86CFM
Rotation Direction: Clounter-clockwise
Size:40x40x10mm
Size:18g

***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.

5. MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

Feature

Description

Color:2pcs Brushless DC Cooling Fan

Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of ultra-quiet fan. In a word, it is a highly cost-effective product.

Specification:
Model: 4010 Blower Fun
Rated Voltage: DC12V
Operation Voltage: DC7V – 12V
Consuming Current: 0.08A+5%
Consuming Power: 0.96W
Max. Air Flow: 2.8CFM
Acoustic Noise: 22dBA
Rated Speed: 7200±5%RPM
Connector: 2pin-ph2.54
DC Line Length: 300mm
Rotation Direction: Clounter-clockwise
Life Expectance: 50,000 hours at 25 degree
Size: 40x40x10mm
Screw Hole Diameter: 1.5mm

Features:
1. Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
2. Improve life
3. Lubricating
4. Not easy to make noise

Polarity Protection:
1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged)
2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.

Package Including
2 * 4010 12V 0.08A Brushless DC Cooling Fan

6. TD8020LS 12V 0.08A 8CM Water Dispenser Fan 808020MM Silent Fan

TD8020LS 12V 0.08A 8CM Water Dispenser Fan 808020MM Silent Fan

Feature

Description

Product type:TD8020LS

Voltage: 12V

Current: 0.08A

Speed: 2500RPM

Volume: 31.6CFM

Wind pressure: 2.15

Noise: 26dB


Package included:

1 x New original TD8020LS 12V 0.08A 8CM 80*80*20MM quiet fan

7. KINGPRINT DC 12V 40x40x10mm Silent Brushless Cooling Fan for 3D Printer (Pack of 2pcs)

KINGPRINT DC 12V 40x40x10mm Silent Brushless Cooling Fan for 3D Printer (Pack of 2pcs)

Feature

8. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

Feature

Description

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A

Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

9. for Nidec X880927-004 U40R05MS1A7-57A07A for Xbox Kinect 2.0 Body Sense Game Cooling Fan DC5V 0.08A 4CM

for Nidec X880927-004 U40R05MS1A7-57A07A for Xbox Kinect 2.0 Body Sense Game Cooling Fan DC5V 0.08A 4CM

Feature

Description

Models: X880927-004 U40R05MS1A7-57A07A
Specifications: 40*40*15MM
Voltage: 5V DC
Current: 0.08A (ultra quiet fan)
Power: 0.4W
Bearing: high precision maintenance free magnetic bearing
The original 4 line interface: 4 needles socket may choose to modify the USB interface,
the interface is extended to 40 cm length modification

10. GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B (Black)

GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B (Black)

Feature

Description

Color:Black

Description:
The 52Pi New Colorful Ice Tower Cooler is inspired by the single-stack tower-style heatsink and fan (HSF) assemblies which dominate the desktop PC market. It includes thermal interface material (TIM) pads, mounting brackets and accessories for the Raspberry Pi 4 and Raspberry Pi 3 Model B/Model B+, a tiny screwdriver, and a small but full-color manual. new feature is using Compatible bracket and a color LED fan with automatic color change.

Features:
Color LED fan with automatic color change
Single-stack tower-style heatsink
DC 5V Power in (Can be powered by the Raspberry Pi)
5mm copper tube
Super heat dissipation
Rated power 0.4W @5V, 0.08A
Easy to setup
Acrylic protection panel
Plug and play

Package Includes
1 x Ice Tower Cooler
4 x M2.5×6+6 Copper Stick
4 x M2.5 Nuts
6 x M2.5×6 Screws
3 x Thermal Tape
1 x Screwdriver
1 x Mounting brackets pack (For 3B/3B+/4B)
1 x Acrylic protection panel
1 x Instructions

Conclusion

By our suggestions above, we hope that you can found Cooling Fan 08 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general