Top 9 Anet A8 Extruder Cooling Fan

0

Finding your suitable readers for anet a8 extruder cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for anet a8 extruder cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.

524 reviews analysed

1. 3D Printer Cooling Fan Extruder Blower Fan DC 12V 40×10 50×15 Fans (1M) Eewolf

3D Printer Cooling Fan Extruder Blower Fan DC 12V 40x10 50x15 Fans (1M) Eewolf

Feature

Description

3D Printer Cooling Fan Extruder Blower Fan DC 12V 40×10 50×15 Fans 1M Eewolf

Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off.
Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan
4010 fan: 12V 0.09A 5015 fan: 12V 0.16A
Wire length: 1M
NOTE: LOGOS MAY BE DIFFERENT WITH THE PICTURES.

2. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

Feature

3. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

Feature

4. Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)

Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)

Feature

5. YOTINO 3Pcs 5015 Fan 12V 0.23A 3D Printer Cooling Fan Blower Radial Fan for Prusa i3 Creality CR10(50 x 50 x 15mm, Black)

YOTINO 3Pcs 5015 Fan 12V 0.23A 3D Printer Cooling Fan Blower Radial Fan for Prusa i3 Creality CR10(50 x 50 x 15mm, Black)

Feature

6. 3D Printer Fan Blower Fan DC 24V 40×10 50×15 Extruder Cooling Fan (30cm) for Prusa i3 DIY Kit Eewolf

3D Printer Fan Blower Fan DC 24V 40x10 50x15 Extruder Cooling Fan (30cm) for Prusa i3 DIY Kit Eewolf

Feature

Description

3D Printer Cooling Fan Extruder Blower Fan DC 24V 40×10 50×15 Fans (30CM) for Prusa i3 DIY Kit Eewolf

Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off. (Wire length is 30CM)
Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan
4010 fan: 24V 0.09A 5015 fan: 24V 0.16A
Wire length: 30CM

7. Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Feature

Description

Descriptions:
Please recognize the seller: Wangdd22
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

Specification:
12V/40W heater,temperature can be up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
A v6 heating block
Outer thread : M6 M7
Throat outer diameter: 6mm
Throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x V6 heating block
2 x teflon tube within stainless steel nozzle throat

8. Anet MK8 Extruder Kit for Anet A6 3D Printer, Hot End Extruder Set Including – Extruder Motor, Cartridge Heater, Thermistor, Throat Tube, Heater Block, 0.4mm Nozzle, Cooling Fan and Heat Sink

Anet MK8 Extruder Kit for Anet A6 3D Printer, Hot End Extruder Set Including - Extruder Motor, Cartridge Heater, Thermistor, Throat Tube, Heater Block, 0.4mm Nozzle, Cooling Fan and Heat Sink

Feature

Description

MK8 Extruder kit / MK8 Hotend with fan – Anet A6 3D printer Accessories

Description:
–Suitable for: Anet A6 3D Printer
–Axis speed: 40mm/s
–Nozzle flow rate: about 24cc/h
–Nozzle diameter: 0.4mm extruder nozzle.
–Print material: ABS, PLA 1.75mm / 3.0mm filament
–Stepper motor model: SL42STH40-1684A
–Cooling fan operating voltage:12V
–The length of the Cartridge heating head is 0.5m, the length of The stepping motor cable is 1m.
–K-type thermocouple 500MM link line. NTC 100K B=3950
–Heat sink: 40*40*10mm
–Extrusion head: voltage 12V, power 40W
–Extrusion head heating voltage 12V, preventing 5-9 ohms, 500MM cable.

Package list:
1 x Printer head kit for Anet A6 3D printer

9. SoundOriginal 12VDC Brushless Blower Cooling Fan 50x50x15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (x1 12V)

SoundOriginal 12VDC Brushless Blower Cooling Fan 50x50x15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (x1 12V)

Feature

Conclusion

By our suggestions above, we hope that you can found Anet A8 Extruder Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general